Epidemiological investigation of the prevalence and features of postweaning multisystemic wasting syndrome in Japan.

To investigate the prevalence and features of postweaning multisystemic wasting syndrome (PMWS) in Japan, an epidemiological study was conducted in 692 weaned pigs with various clinical signs, commonly including wasting or weight loss, collected from 129 swine farms between 2000 and 2003. The presence of PMWS was diagnosed by the detection of characteristic histological lesions and moderate to large amounts of porcine circovirus type 2 (PCV2) antigen within the lesions in multiple lymphoid tissues. Postweaning multisystemic wasting syndrome was positive in 23.4% of pigs (162/692) over the course of the study, and occurred in 50.4% of the farms (65/129). Mortality in 30-120-day-old pigs in the farms positive for PMWS varied from 0.1 to 32.0%. No significant difference in mortality was seen between PMWS-positive and -negative farms (P = 0.1). However, mortality was significantly higher in the PMWS-positive farms where PMWS was diagnosed in more than 50% of the pigs examined compared to farms negative for PMWS (P = 0.02). These findings indicate that PMWS has spread widely in Japan. Moreover it may exist in variable forms in swine farms, including an epidemic form or a subtle endemic or sporadic form. A case-control study suggested that risk factors for the occurrence of PMWS include porcine reproductive and respiratory syndrome (PRRS) pneumonias and Mycoplasma hyorhinis infection.     

Stress responses in neonatal meat and layer Nagoya chicks

We reported that meat chicks have either a greater capability to acclimatize to novel environments, or a blunted hypothalamic‐pituitary‐adrenal response to novel environments compared with layer chicks in a commercial base. The present study compared the differences in behavior and plasma corticosterone concentrations under isolation‐induced stress between neonatal meat and layer Nagoya chicks which had been separated from the same population. Both types of neonatal chicks reared in groups were individually separated and their spontaneous activity and distress‐induced vocalizations were monitored for 10 min. The responses of the two types were remarkably different, with the meat chicks being less active than the layer chicks. Distress‐induced vocalizations were fewer in the meat than in the layer chicks. The meat chicks spent more time in a sleeping posture during isolation‐induced stress. Plasma corticosterone concentrations measured at the end of the test tended to be higher in the layer chicks than in meat ones, but not significantly. In conclusion, the selection of Nagoya chickens for meat and layer may have trends similar to those observed in commercial chickens in relation to stress susceptibility.     

Microbiota of 'airag', 'tarag' and other kinds of fermented dairy products from nomad in Mongolia

The traditional fermented dairy products were collected from three nomadic families in Donto‐Govi prefecture in Mongolia (central Mongolia), and those microbiota were analyzed. These samples consist three of ‘airag’, two of ‘tarag’, two of ‘isgelen tarag’ and ‘qoormog’, and some cheeses. In airag, Lactobacillus (L.) helveticus, L. kefiri, and Saccharomyces (S.) dairensis were common, and L. paracasei, L. plantarum, L. farciminis, S. cerevisiae, Issachenkia (I.) orientalis, Kluyveromyces (K.) wickerhamii were also found. In tarag, isgelen tarag and qoormog, L. helveticus, L. kefiri, L. fermentum, L. paracasei and L. acetotolerance were found. L. delbrueckii subsp. bulgaricus was also found in one tarag and one qoormog samples. Randomly amplified polymorphic DNA (RAPD) analysis showed that there were diversity in each L. helveticus family and products, and there were common strains found in airag and tarag in the same family.     

Varietal differences in phenolic content and astringency in skin and flesh of hardy kiwifruit resources in Japan

Varietal differences in the total phenolic content and astringency in the skin and flesh were determined among the cultivars and local collections of hardy kiwifruit with a ploidy variance found in Japan. The average values of the total phenolic content in the skin and flesh were 2.66 and 0.18 g 100 g⁻¹ FW, respectively. There were large varietal differences in the total phenolic content in the skin in the range of 1.3–5.0 g 100 g⁻¹ FW. Kochi (tetraploid), while Gassan and ‘Mitsuko’ (hexaploid) contained a larger amount of total phenolics. High astringency was found in Gassan, ‘Mitsuko’ and ‘Hoko’ (hexaploids) and Kochi. HPLC analysis showed that the major components of phenolics in the flesh were (+)-catechin, chlorogenic acid, rutin, (−)-epicatechin and quercetin.     

The response of ectomycorrhizal fungi on Pinus densiflora seedling roots to liquid culture

Japanese red pine (Pinus densiflora) seedlings taken from a nursery were grown in liquid culture with all roots entirely submerged in water. The aims of the present study were to observe the reactions of preformed ectomycorrhizae to liquid culture and to examine new infections by ectomycorrhizal fungi on newly formed root tips in liquid culture. Inoculation levels were controlled by trimming the ectomycorrhizal roots to one of three selected root lengths. The results showed that the mantles of pre-formed ectomycorrhizae were lost during the 8 weeks of the liquid culture and that these preformed root tips became blackish and wrinkled, but Hartig nets remained in these blackish root tips. On the newly formed lateral root tips, no ectomycorrhizal mantles were formed, although Hartig nets were found. In addition, the level of inoculum did not affect the frequency of Hartig nets in newly formed root tips, suggesting that the density of inoculum was more important than the amount of inoculum for new infection. In conclusion, ectomycorrhizal fungi endured and infected new roots while submerged; however, only Hartig nets were formed and not mantles.     

Spectrophotometrical characteristics in the near infrared region in beech (<Emphasis Type="Italic">Fagus crenata</Emphasis>) and pine (<Emphasis Type="Italic">Pinus densiflora</Emphasis>) litters at the various decomposing stages

We examined the relationships between the absorptional characteristics in the near infrared region and the chemical changes of decomposing beech (Fagus crenata) and pine (Pinus densiflora) litters. Spectra as well as the concentrations of chemical substances approached each other and converged with decomposition, although both initial characteristics differed markedly between beech and pine. This indicated that the fundamental chemical structures were almost the same, although their organochemical composition differed. Specific absorption bands for lignin, polysaccharide, and protein were identified at 2,140 and 1,670 nm, 2,270, 1,720, 1,590, and 1,216 nm, and 2,350 nm, respectively. Absorbance at 1,670 nm, peculiar band of aromatics, showed a positive correlation with lignin concentration, which suggested the relative increment of aromatics due to condensed lignin in decomposing litters. Absorbance at 2,140 nm, characterized as the C–H bond in HRC = CHR, showed a negative correlation with lignin concentration, which suggested the decrements of some structures such as side-chains in lignin polymers unrelated to aromatics. Absorbance at 2,270, 1,720, and 1,216 nm, specified to O–H/C–O/C–H bonds in saccharide, might reflect the change of polysaccharide during decomposition because they showed a positive correlation to polysaccharide concentration. In the same way, absorbance at 2,350 nm, identified to the C–H/CH₂ bonds in protein, showed a negative correlation to nitrogen concentration in decomposing litters, which might indicate that the C–H/CH₂ bonds in protein decreased with decomposition due to microbial consumption of carbon in protein. Our findings suggested the possibility that the spectral changes indicate the litter digestibility during decomposition and that also explain the compositional change in decomposing litters.     

Rapid production of high-strength cement-bonded particleboard using gaseous or supercritical carbon dioxide

This study deals with the effects of curing treatment with gaseous and supercritical carbon dioxide on the properties of cement-bonded particleboard (CBP) manufactured by the conventional cold-pressing method. The hydration of cement and the mechanism of improvement were examined using X-ray diffractometry (XRD), thermal gravimetry (TG-DTG), and scanning electron microscopy (SEM) observations. The results are as follows: (1) The curing of cement was accelerated concomitantly with the improvement in mechanical and dimensional properties of CBP significantly by curing with gaseous or supercritical carbon dioxide. (2) Supercritical carbon dioxide curing imparted boards optimal properties at a faster rate than did gaseous curing. (3) Accelerated formation of calcium silicate hydrate and calcium carbonate and the interlocking of those hydration products on the wood surface are potentially the main reasons for the superior strength of carbon dioxide-cured boards.     

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.     

Characterization of the morphological,physical, and mechanical properties of seven nonwood plant fiber bundles

The morphological, physical, and mechanical properties of the nonwood plant fiber bundles of ramie, pineapple, sansevieria, kenaf, abaca, sisal, and coconut fiber bundles were investigated. All fibers except those of coconut fiber had noncircular cross-sectional shapes. The crosssectional area of the fiber bundles was evaluated by an improved method using scanning electron microscope images. The coefficient factor defined as the ratio of the cross-sectional area determined by diameter measurement, to the cross-sectional area determined by image analysis was between 0.92 and 0.96 for all fibers. This indicated that the area determined by diameter measurement was available. The densities of the fiber bundles decreased with increasing diameters. The diameters of each fiber species had small variation of around 3.4%-9.8% within a specimen. The tensile strength and Young’s modulus of ramie, pineapple, and sansevieria fiber bundles showed excellent values in comparison with the other fibers. The tensile strength and Young’s modulus showed a decreasing trend with increasing diameter of fiber bundles.     

Structural characteristics of cell walls of kenaf (<Emphasis Type="Italic">Hibiscus cannabinus </Emphasis>L.) and fixation of carbon dioxide

 Kenaf (Hibiscus cannabinus) plants are widely known for their contribution to the global and regional environment because of their ability to fix CO₂. On the other hand, some scientists have doubts about CO₂ fixation by kenaf and have misgivings about the effect of kenaf on the ecosystem. We have characterized the structural characteristics of cell walls of bast fibers, cores, roots, and leaves of kenaf during the maturation of plants and investigated the rate of photosynthesis. During maturation of the kenaf plant the cellulose (bast fiber 52–59%, core 44–46%) and lignin (bast fiber 9.3–13.2%, core 18.3–23.2%) contents increased significantly. The aromatic composition of the lignin of bast fiber was significantly different from that of the core lignin and of other plants. The lignin of bast fiber appears similar to pure syringyl lignin. Fixation of CO₂ by kenaf plants and their contribution to the global environment are discussed. A significatly high rate of photosynthesis of kenaf plants was observed compared to that of woody plants in Japan, but the amount of CO₂ fixation depends on the characteristics of the plantation. If the kenaf was planted in high density, about twice as much CO₂ was fixed as was fixed by trees in a tropical rain forest. Received: April 22, 2002 / Accepted: July 24, 2002 Acknowledgments This project was supported by the Science and Technology Agency (STA) fellowship of the Japan International Science and Technology Exchange Center (JISTEC), which has been successfully applied by Dr. Shuji Hosoya, Forestry and Forest Products Research Institute. We thank Dr. Toshio Sumizono and Mr. Masao Sakurai, Forestry and Forest Products Research Institute, for their kind help in determining the rate of photosynthesis and cultivating the kenaf plants, respectively. We also express our appreciation to Dr. Quang Hung Le, College of Agriculture and Forestry, Ho Chi Minh City, Vietnam for offering information about the cultivation of kenaf at Thu Duc District, Ho Chi Minh City.